Problem with SBuilder
Re: Problem with SBuilder
Can you zip up the .SBP file for your project and attach it to a post?
Lance
Re: Problem with SBuilder
Sure, here it is!
http://maza.kapsi.fi/maenttae.SBP
I'm trying to exclude trees from the area and put grass layer on the runway. The line is just for marking the true position of the runway. Airport itself is Mänttä Sassi unofficial landing strip.
I have manually created the exclude file and done somewhat succesfully VTP2 poly with Ground2k, but I don't like that software.
http://maza.kapsi.fi/maenttae.SBP
I'm trying to exclude trees from the area and put grass layer on the runway. The line is just for marking the true position of the runway. Airport itself is Mänttä Sassi unofficial landing strip.
I have manually created the exclude file and done somewhat succesfully VTP2 poly with Ground2k, but I don't like that software.
-
- Posts: 420
- Joined: Sat Oct 16, 2004 10:11 pm
Re: Problem with SBuilder
Hi Matti.
The default AB files ( Airport backgrounds ) use VTP layer 7 and an "assembled" texture:
1189 Low Sparse Grassland
This will automatically rid the autogen from the airport area, and will eliminate the need for Excludes.
Attached is a zipped file as an example.
Dick
The default AB files ( Airport backgrounds ) use VTP layer 7 and an "assembled" texture:
1189 Low Sparse Grassland
This will automatically rid the autogen from the airport area, and will eliminate the need for Excludes.
Attached is a zipped file as an example.
Dick
Re: Problem with SBuilder
That one still gives errors when compiling!
Code: Select all
Error in line 5
-> VTPFileHeader( 0x100 )
-> unknown command
Error in line 9
-> VTPArea( 1 1 20 15 )
-> unknown command
Error in line 10
-> VTPLayer( 7 1 1 0 )
-> unknown command
Error in line 11
-> VTPTexID( 0 0 )
-> unknown command
Error in line 12
-> VTPPolyCount( 1 )
-> unknown command
Error in line 14
-> VTPPoly( 2 5 0 )
-> unknown command
Error in line 15
-> VTPPointXY( 9252 8653 )
-> unknown command
Error in line 16
-> VTPPointXY( 9144 8678 )
-> unknown command
Error in line 17
-> VTPPointXY( 9025 8704 )
-> unknown command
Error in line 18
-> VTPPointXY( 9019 8696 )
-> unknown command
Error in line 19
-> VTPPointXY( 9246 8644 )
-> unknown command
Error in line 22
-> VTPIndexList( 1 436 79 0 )
-> unknown command
Error in line 26
-> VTPTextureList( 1 1189 0 0 0 4 )
-> unknown command
Error in line 30
-> VTPEnd
-> unknown command
Scasm compilation status: error(s) 14
-
- Posts: 420
- Joined: Sat Oct 16, 2004 10:11 pm
Re: Problem with SBuilder
The VTP SCASM code looks like this:
It compiles with SCASM version 2.96 available from http://www.scasm.de/
If this does not compile, then the problem isn't with SBuilder, but lies somehow with either your version of SCASM, or some regional settings problem in Windows.
Dick
Code: Select all
Set( BUF 8192 )
Header( 1 63 62 25 24 )
VTPFileHeader( 0x100 )
:cell00
VTPArea( 1 1 20 15 )
VTPLayer( 7 1 1 0 )
VTPTexID( 0 0 )
VTPPolyCount( 1 )
VTPPoly( 2 5 0 )
VTPPointXY( 9252 8653 )
VTPPointXY( 9144 8678 )
VTPPointXY( 9025 8704 )
VTPPointXY( 9019 8696 )
VTPPointXY( 9246 8644 )
VTPIndexList( 1
436 79 0
)
VTPTextureList( 1
1205 0 0 0 4
)
VTPEnd
If this does not compile, then the problem isn't with SBuilder, but lies somehow with either your version of SCASM, or some regional settings problem in Windows.
Dick
Dick