Page 1 of 1

Using SBuilder9

Posted: Wed Nov 16, 2011 3:26 pm
by wbunnell
After downloading SBuilder9, loading to a separate Folder, running the program, everything works fine.
After letting SBuilder9, set without being used for a couple days, weeks, the program opens fine, I insert, the airport I want to set background for, the same program I used before, gives me an error message,
“Runtime Error “76”, Path not found”
Reloading the SBuilder, everything works fine, no errors.
Maybe I’m doomed to reload, every time I want to use it.

Re: Using SBuilder9

Posted: Fri Mar 02, 2012 11:44 am
by Mick
Hi wbunnel,

maybe I'm some months late, but if you still have the problem then it might be a solution to check your SBuilder.ini file for the different paths registered there. Make sure all of them are still valid.

If it's the SBuilder project file (.sbp) that gives you the error, you will want to check your ressources. Select / activate a map (e.g.) and edit its properties (right-click on the highlighted border). On the tabs for "Photo Bitmaps", "Land Use Map" and "Mesh Map" you will find many different paths to ressource files (mostly .bmp). Check all of them and you'll most likely find out that one of the files isn't available there anymore.

Regards
Mick

8)

Re: Using SBuilder9

Posted: Wed Mar 07, 2012 12:42 pm
by wbunnell
I don't know how it happened, but the problem has solved itself, its working ok for know.
Thanks for the reply.