Library objects
Library objects
I have problems with library objects, only one item in each category is available. What am I doing wrong? I placed rwy12 and it works well but default objects from fs9 don´t.
Hello,
Are you referring to the picture - "NA - Not available"? .If so you refer to the Help menu:
In order for a picture to appear on the left bottom corner of the window you need to add a bitmap with a filename equal to the identifier as, for example c12b53de46a14ac9c379b5a2f8708fd8.bmp (jpeg also works). The bitmap should be 256 colours and its optimum size should be 210 x 160 pixels. In the SBuilder Design Forum you can search for pictures for general objects. Here is a direct link to download a set of pictures
http://www.ptsim.com/downloads/sbuilder/bmps.zip
In order for the pictures to appear in the bottom left corner of the Objects Properties window they should be unzipped to the folder ..SBuilder/Tools/Bmps/.
Regards, Luis
Are you referring to the picture - "NA - Not available"? .If so you refer to the Help menu:
In order for a picture to appear on the left bottom corner of the window you need to add a bitmap with a filename equal to the identifier as, for example c12b53de46a14ac9c379b5a2f8708fd8.bmp (jpeg also works). The bitmap should be 256 colours and its optimum size should be 210 x 160 pixels. In the SBuilder Design Forum you can search for pictures for general objects. Here is a direct link to download a set of pictures
http://www.ptsim.com/downloads/sbuilder/bmps.zip
In order for the pictures to appear in the bottom left corner of the Objects Properties window they should be unzipped to the folder ..SBuilder/Tools/Bmps/.
Regards, Luis
Thanks Luis for a quick answer, I have been using Ground2k4 for my projects but I wanted to try out Sbuilder to see which is better, so far I think its easier to calibrate maps with sbuilder, then I am going to try out all the rest of it´s features. Thanks for this great program.
regards, Björn Hákonarson
regards, Björn Hákonarson