I have downloaded SBuilder, ver. 2.05.05. When I started it, it started copying bitmaps. After awhile, I got an error message that said: Error 53. File not found. Can anyone help me?
Del.
SBuilder
Download and install this package from Avsim Library.
http://library.avsim.net/download.php?DLID=69398
Panos
Panos M Georgotas
http://library.avsim.net/download.php?DLID=69398
Panos
Panos M Georgotas
-
- Posts: 22
- Joined: Sun May 16, 2004 7:18 pm
- Location: Norway
Hi,
in the text on Avsim library it says that:
"It is assumed that you have SBuilder 2.05 fully installed before trying these files."
If you look inthe sticky topic in this forum, you'll find a link to SBuilder 205 rev 1. I believe you'll have to install this first and then copy later revisions over it.
I hope that helps.
in the text on Avsim library it says that:
"It is assumed that you have SBuilder 2.05 fully installed before trying these files."
If you look inthe sticky topic in this forum, you'll find a link to SBuilder 205 rev 1. I believe you'll have to install this first and then copy later revisions over it.
I hope that helps.