Last revision of SBuilder

Jan Nielsen · Post by **Jan Nielsen** » Tue Dec 13, 2005 6:34 pm

Hi, Luis! [:)]
It's been a long time now since a new revision of SBuilder was announced. I believe the last revision is SBuilder ver. 2.05 rev. 6 found here: http://www.ptsim.com/downloads/sb205rev06.zip
And I believe you must first install the full ver 2.05 rev. 01 from here: http://www.ptsim.com/downloads/sb205rev01.zip
e.g. if you were to make a fresh install.
Would it not be adequate now to update the "sticky" topic with a full installation of the last version?
Merry Christmas to you all! [:D]

Cheers, Jan [8D]

ray · Post by **ray** » Thu Dec 15, 2005 12:33 pm

Hi -
this revision of 2.05 - revision 6 - give a runtime error 9 and can not be started - even though 2.05 along with revision 5 is fully installed.

perhaps Luis can give a brief explanation.

ray

2wheelsup · Post by **2wheelsup** » Mon Dec 19, 2005 1:52 am

I get the same message.

Luis? any ideas?

Alan

scruffyduck · Post by **scruffyduck** » Mon Dec 19, 2005 7:40 am

Is there any text with the runtime error number?

Jon

bassgeo · Post by **bassgeo** » Tue Dec 20, 2005 1:07 am

Download from Avsim.
http://library.avsim.net/download.php?DLID=69398

Panos M Georgotas

Jan Nielsen · Post by **Jan Nielsen** » Tue Dec 20, 2005 10:33 am

Hi,
now if I got it right, a fresh new install requires three steps:
1. Full install of SBuilder ver. 2.05 rev. 01 found here:
http://www.ptsim.com/downloads/sb205rev01.zip
2. An additional rev. 05 found here:
http://library.avsim.net/download.php?DLID=69398
3. An other addition for rev. 06 found here:
http://www.ptsim.com/downloads/sb205rev06.zip

A full installation of SBuilder ver. 2.05 rev. 06 requires a prior installation of revision 01 and 05 before the addition of rev. 06. [8D]
I only started this thread to jump forward the shortcut for the last revision, thereby making it easier to find the total downloads for new users whom I recommend this program to. I have had a working rev. 06 for quite some time myself. I hope Luis can find an opportunity to make an upgrade to the sticky topic for a full installation of the last revision.

Cheers, Jan
[8D]

2wheelsup · Post by **2wheelsup** » Thu Dec 22, 2005 1:47 am

Works when you install it like Jan says.

Thanks [:D][^]

ray · Post by **ray** » Thu Dec 22, 2005 12:41 pm

Cheers Jan !

thanks for the input ! [:D]

ray