Joining polygons

This is the Forum to discuss the use of SBuilderX (version 3.10 and above). For previous versions of SBuilder please use the "SBuilder for Flight Simulator FS2004" forum.
Post Reply
joviro
Posts: 6
Joined: Tue Jul 03, 2007 7:44 pm
Location: Brazil

Joining polygons

Post by joviro » Tue Jul 03, 2007 7:52 pm

Hi Luis,
With SBuilderX I can't join polygons with same properties and common side. Have I missed something?

joviro

User avatar
Luis Sa
Posts: 1736
Joined: Sun May 18, 2003 11:17 am
Location: Portugal
Contact:

Post by Luis Sa » Tue Jul 03, 2007 8:31 pm

Hello,

These are my INI settings

NameJoin=False
DirJoin=False
DisplayJoin=False

Polygons are joined if they have common points. If DisplayJoin is set to True, then 2 points are considered to be the "common" if they are closer then 3 display pixels. If DisplayJoin=False then 2 points are considered to be the same if their latitudes differ less than 1/255 times the latitude_of_the_edge_of_a_quad_LOD13 and if their longitudes differ less than ...( a very small number).

Regards,

Luis

joviro
Posts: 6
Joined: Tue Jul 03, 2007 7:44 pm
Location: Brazil

Post by joviro » Tue Jul 03, 2007 8:48 pm

Thanks for the explanation. I just change the INI settings and all was fine.

joviro

Post Reply