Transparency Level

This is the Forum to discuss the use of SBuilderX (version 3.10 and above). For previous versions of SBuilder please use the "SBuilder for Flight Simulator FS2004" forum.
Post Reply
joviro
Posts: 6
Joined: Tue Jul 03, 2007 7:44 pm
Location: Brazil

Transparency Level

Post by joviro » Fri Jul 06, 2007 2:14 pm

Hi Luis,

Has a manner to leave the transparency level of polygons at midlle(128) as default?

Regards

joviro

User avatar
Luis Sa
Posts: 1734
Joined: Sun May 18, 2003 11:17 am
Location: Portugal
Contact:

Post by Luis Sa » Fri Jul 06, 2007 11:10 pm

Hi,

Please open the Polys.txt file that you can find inside the Tools folder. Every polygon has a Color. Color=80XXYYZZ will do what you want. When color starts by FF (=255) it will be full opaque. If it starts with 80 (=128) it will be semi transparent. Use Find & Replace and create your own custom Polys.txt.

Good luck,

Luis

rhumbaflappy
Posts: 419
Joined: Sat Oct 16, 2004 10:11 pm

Post by rhumbaflappy » Sat Jul 07, 2007 1:52 am

Hi joviro.

You may also want to change transparency for colors in the following files in the Tools folder:

Lands.txt, Lines.txt, Polys.txt, and Waters.txt

Using a replace funtion in a text editor, change

Color=FF to Color=80 for all the "finds".

Dick

joviro
Posts: 6
Joined: Tue Jul 03, 2007 7:44 pm
Location: Brazil

Post by joviro » Mon Jul 09, 2007 2:56 am

Thanks to Luis and Dick!

joviro

Post Reply