Water mask

This is the Forum to discuss the use of SBuilderX (version 3.10 and above). For previous versions of SBuilder please use the "SBuilder for Flight Simulator FS2004" forum.
Post Reply
xhenry
Posts: 8
Joined: Thu Jul 12, 2007 7:44 pm

Water mask

Post by xhenry » Thu Dec 13, 2007 7:55 pm

Hi all,

Me again lol. I'm having some serious problems trying to get a watermask to show up correctly...

With the following inf file I get white where the water should blend. This is using my original bitmap and a copy of the original with the black mask for water and white for land...

Any help would be greatly appreciated.
Xavier

[Source]
Type = MultiSource
NumberOfSources = 2

[Source1]
Type = bmp
SourceDir = C:\BLOCK F
Layer = Imagery
SourceFile = Area_Lp6_SnapOff_N030000000_N029000000_W086000000_W084000000.bmp
Lon = -86 ;for top left and bottom right is: -84
Lat = 30 ;for top left and bottom right is: 29
NumOfCellsPerLine = 5827 ;Pixel is not used in FSX
NumOfLines = 3348 ;Pixel is not used in FSX
CellXdimensionDeg = 0.000343229792345976
CellYdimensionDeg = 0.00029868578255675
PixelIsPoint = 0
Variation = day
NullValue = 255,255,255
Channel_LandWaterMask = 2.0


[Source2]
Type = bmp
SourceDir = C:\BLOCK F
Layer = none
SourceFile = Area_Lp6_SnapOff_N030000000_N029000000_W086000000_W084000000_H20.bmp
Lon = -86 ;for top left and bottom right is: -84
Lat = 30 ;for top left and bottom right is: 29
NumOfCellsPerLine = 5827 ;Pixel is not used in FSX
NumOfLines = 3348 ;Pixel is not used in FSX
CellXdimensionDeg = 0.000343229792345976
CellYdimensionDeg = 0.00029868578255675
PixelIsPoint = 0
SamplingMethod=Gaussian

[Destination]
DestDir = C:\IMAGERY
DestBaseFileName = Area_Lp6_SnapOff_N030000000_N029000000_W086000000_W084000000
BuildSeasons = 0
UseSourceDimensions = 1
Lod = 5,13
CompressionQuality = 95
SplitFileLOD = 5

Post Reply