SBuilderX Forum

Guys pls help. AHave a error during compilation. Photosnery compiles fine, but with a polygons - error window.

Hello,

Unfortunately the error window does not help to find the error. If the problem remains try to explain it in more detail. If it happens with a SIMPLE AND SMALL project, remove any bitmaps, save it (or export it) and attach the file here so that other users may be able to reproduce the situation.

Best Regards,

Luis

Thx for response.
Just finished test with compilation.

Land+Water Class tool, photo bitmaps, and objects compiles fine.
I got error only with lines or polygons. Is any considerations? thx

Hello,

There is a number of possible reasons. Have you sh2vc in the Tools folder? Your lines.txt and polys.txt in the Tools folder are OK? Please start by checking these things,

Regards,

Luis

All is ok. Look at screen pls

My Sbuilder.ini file:

[Recent Files]
RecentFile1=

[RecentDirs]
BmpDir=
SaveDir=
TexDir=
SurferDir=
AppendDir=
ImportDir=
OpenDir=
ShapeDir=

[Main]
MacroASDPath=C:\Program Files (x86)\SBuilderX\ASD
MacroAPIPath=C:\Program Files (x86)\SBuilderX\API
Rwy12Path=C:\Program Files (x86)\SBuilderX\Rwy12
BackUpSeconds=60
BackUpON=False
SmoothDistance= 50
SampleDistance= 10
CornerSmooth=True
NoEndsSmooth=True
NameJoin=True
DirJoin=True
DisplayJoin=True
ShowLabels=1
AutoLinePolyJoin=1
UnselectedPointColor=FFFF0000
SelectedPointColor=FF008000
BGLFolder=C:\Program Files (x86)\SBuilderX\Scenery
ShowDonation=False
AskDelete=True
BorderON=True
ShowAircraftPeriod= 5000
MeasuringMeters=True
DecimalDegrees=False
LatIniCenter= 40
LonIniCenter=-10
DefaultWC=2
DefaultLC=11

[Objects]
LibObjectsPath=C:\Program Files (x86)\SBuilderX\LibObjects
MacroASDPath=C:\Program Files (x86)\SBuilderX\ASD
MacroAPIPath=C:\Program Files (x86)\SBuilderX\API
Rwy12Path=C:\Program Files (x86)\SBuilderX\Rwy12

[Lines]
MakeClosedLineFromPoly=False
DefaultLineColor=FF0000FF
SelectedLineColor=FF008000
DefaultLineWidth= 50
DefaultLineAltitude= 0

[Polys]
PolyColorBorder=FF000000
DefaultPolyColor=FFFFFF00
PolyFill=True
DefaultPolyAltitude=0

[Shapes]
BLNLineColor=FFFF0000
BLNPolyColor=FFFF0000
AddToCells=True
ShapePolyColor=FFFFC0CB
ShapePolyAltitude= 0
ShapePolyGuid={9ABCDEF0-FEDC-BA98-7654-3210FEDCB000}
ShapeLineColor=FF0000FF
ShapeLineWidth= 50
ShapeLineAltitude= 0
ShapeLineGUID={89ABCDEF-EDCB-A987-6543-210FEDCBA000}

[Tiles]
CompressionQuality=100
HardWinterVariations=January
WinterVariations=December,February,March
FallVariations=October,November
SpringVariations=April,May,June
SummerVariations=July,August,September
ReprojectMercatorTiles=True
ActiveTileFolder=

[BLN]
BLNLineColor=FFFF0000
BLNPolyColor=FFFF0000
BLNExportAltitudes=True
BLNLineFromPoly=True
BLNEndWidth= 35
BLNStartWidth= 35
BLNIsLineAlt=True
BLNIsPolyAlt=True
BLNLineGuid={89ABCDEF-EDCB-A987-6543-210FEDCBA000}
BLNPolyGuid={9ABCDEF0-FEDC-BA98-7654-3210FEDCB000}
BLNSeparator=,

[Tutorials]
Link1=
Link2=
Link3=
Link4=
Link5=
Title1=
Title2=
Title3=
Title4=
Title5=

Please look at screen. Maybe some system files missed

Byos and girls, i found solution of my problem.

Download this tool:
http://www.apexsql.com/zips/CorFlags.zip

Put it to folder where is SBuilderX.exe

Run in command line:

corflags.exe sbuilderx.exe /32bit+

Works fine. Topic closed. Thx.

Hi,

I was reading your previous posts to see if anything was OK when I read the last one! So I rest!

Note: the version that is being tested will have the problem that you refer to corrected, as well as many other improvements.

Regards,

Luis