Maps from disk

This is the Forum to discuss the use of SBuilderX (version 3.10 and above). For previous versions of SBuilder please use the "SBuilder for Flight Simulator FS2004" forum.
Post Reply
bar_rodoy
Posts: 6
Joined: Fri Nov 19, 2010 6:38 pm

Maps from disk

Post by bar_rodoy » Thu Mar 29, 2012 3:13 pm

Hey, I have added a map from disk and I calibrated it, but I cant compile it as BGL. When I press on the compile button I cant select the "Photo scenery" option to compile. Any help?

meshman
Posts: 219
Joined: Sun Jan 01, 2006 11:54 pm

Re: Maps from disk

Post by meshman » Thu Mar 29, 2012 5:26 pm

After adding and calibrating the Map, have you used the menu Select | All Maps prior to trying to compile the file? SBuilderX can compile many things. You need to tell the program what you are trying to compile or tell it to compile Everything.
Lance

bar_rodoy
Posts: 6
Joined: Fri Nov 19, 2010 6:38 pm

Re: Maps from disk

Post by bar_rodoy » Thu Mar 29, 2012 5:40 pm

Off course. Here is a picture that will help you understand:
http://i41.tinypic.com/9a01u9.jpg

meshman
Posts: 219
Joined: Sun Jan 01, 2006 11:54 pm

Re: Maps from disk

Post by meshman » Fri Mar 30, 2012 4:55 pm

Your picture shows that the Map has been highlighted. Working with SBuilderX requires certain steps be followed. To compile a Map or background image you must go into the Menu and choose Select | All Maps and then click the Compile button.

If you are doing that, then I'd make sure that SBX has found and copied over the different compilers from the SDK. These would be found in the \SBuilderX\Tools folder.
Lance

bar_rodoy
Posts: 6
Joined: Fri Nov 19, 2010 6:38 pm

Re: Maps from disk

Post by bar_rodoy » Fri Mar 30, 2012 10:53 pm

I have got it to work. thanks.

Post Reply