Water class ident

This is the Forum to discuss the use of SBuilderX (version 3.10 and above). For previous versions of SBuilder please use the "SBuilder for Flight Simulator FS2004" forum.
Post Reply
Yardreamer
Posts: 12
Joined: Wed Jul 09, 2014 11:45 pm

Water class ident

Post by Yardreamer » Tue Jul 15, 2014 6:33 pm

I am having a real issue trying to remove this section of shore line as per this thread http://www.ptsim.com/forum/viewtopic.php?f=22&t=2318
do I need to remove the water first then the shoreline?
if so I have no idea what water and shoreline type they are I have tried several type exclusions but nothing disappears until I place exclude all shoreline ...

Dreamer

rhumbaflappy
Posts: 419
Joined: Sat Oct 16, 2004 10:11 pm

Re: Water class ident

Post by rhumbaflappy » Tue Jul 15, 2014 11:51 pm

If you can zip the offending scenery and attach it, I would have a better idea of what you are doing.

If it is a vector scenery, it can be excluded. If it is photoreal, then it cannot.

Dick
Dick

Yardreamer
Posts: 12
Joined: Wed Jul 09, 2014 11:45 pm

Re: Water class ident

Post by Yardreamer » Wed Jul 16, 2014 1:46 am

Many Thanks
Dreamer
Attachments
Shoreline zip b.zip
2 of 2
(15.05 KiB) Downloaded 733 times
CAX3.zip
1 of 2
(43.18 KiB) Downloaded 766 times

rhumbaflappy
Posts: 419
Joined: Sat Oct 16, 2004 10:11 pm

Re: Water class ident

Post by rhumbaflappy » Wed Jul 16, 2014 10:33 pm

The tag Exclude_All_Terrain_Items should get rid of all terrain items touched by the triangle. You could try Exclude_All_Shorelines... to limit the exclude to just the shore. Right-click on the triangle edge, and select properties to select the exclude type.

Again, if this is a photoreal, there is no exclusion that can be used.

Dick
Dick

Yardreamer
Posts: 12
Joined: Wed Jul 09, 2014 11:45 pm

Re: Water class ident

Post by Yardreamer » Wed Jul 16, 2014 10:58 pm

Many thanks Dick
I was just hoping to exclude that small area but it looks like that is not going to happen. Apparently after researching the entire QMID shoreline has to be removed and I am looking at a huge amount of shoreline to rebuild. Since this project is basically to practice new techniques I am just going work around it. I probably will one day as there is quite a variance of shoreline type not to mention I am only 1/2 k from the next QMID so I will be doubling the shoreline ...

with appreciation
Murray

Post Reply