Island again ........

This is the Forum to discuss the use of SBuilderX (version 3.10 and above). For previous versions of SBuilder please use the "SBuilder for Flight Simulator FS2004" forum.
sbx7634
Posts: 11
Joined: Tue Aug 22, 2017 9:52 am

Re: Island again ........

Post by sbx7634 » Tue Sep 05, 2017 3:37 pm

Hi Luis ,

Thanks for your suggestion . It works fine with coastline add-on loading first in the Scenery Library
and then the island (CVX) .
Only having shore North and South within the QMID my added Hydropoly ended up with 545 points in
order to have a decent presentation , but it looks good .
What l have noticed is that if your island is near a shore , it takes the characteristics of the nearby shore
and no landglass is necessary except of course if you wish to enhance it with whatever, the island is hard .
Playing around I tried with the same procedure to make an island in open water applying additionally a LG
but the aircraft sinks , the land is no hard . What do I do wrong here .

Thank you again for you valuable help

Cheers- George
Attachments
island.jpg

User avatar
luisfeliztirado
Posts: 436
Joined: Sun May 15, 2005 9:15 am
Location: Santo Domingo

Re: Island again ........

Post by luisfeliztirado » Wed Sep 06, 2017 11:30 am

Probably there is no altitude mesh there, so you will need to add one.

Best regards.
Luis

sbx7634
Posts: 11
Joined: Tue Aug 22, 2017 9:52 am

Re: Island again ........

Post by sbx7634 » Wed Sep 06, 2017 1:13 pm

You always have the right answer .

Thank you and kind regards

George

Post Reply